True Digital

Instructions for Feeder Setup

• 1 Base with wheels  
• 2 Aluminum Sidebars
• 2 Feeder Brackets
• 16 False Cartridges
• 20 Screws (4 big, 16 small)

1. Secure the aluminum bars onto the base using the (4) four larger screws by positioning the screw track inside the base with wheels.

   2. After regulating the reservoir so that the reservoir is at the same height as the printing heads, slide the feeder bracket into the screw track and secure the feeder bracket with screws.

 

3. Slide the second feeder bracket into the opposite end of the screw track and secure with the remaining screws.

 

4. Connect the cartridge hoses to the reservoirs, making sure they are level with the printing heads.

Fully Assembled Feeder System

All feeder systems come with 8 bottles and 16 cartridges. The bottles and cartridges are removable so you can choose the amount your printer requires

Parts included in a Standard Feeder System

Base With Wheels
Aluminum Sidebars
Feeder Brackets
False Cartridges

Installing Ink Bottles

 

1. Remove the center cut out from the cap of the J-Teck ink bottle.

2. Unscrew the cover from the feeder bracket, exposing the metal spike.

3. Slide the top of the ink bottle into the cover then screw the cover back in tightly, securing the ink bottle onto the metal spike.